Works out of box very stable with asix kernel driver on latest raspbian 3. As a workaround, doubling the socket buffer size will prevent the kernel oops: Where can I obtain the latest AXB drivers? Check with lsusb -v, field bcdUSB. Raspberry Pi reboots when you plug it into the USB port, but after that works fine. Please contact the support guys of the manufacturer for further support if necessary.
|Date Added:||16 September 2015|
|File Size:||14.59 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Works very well on a Raspberry Pi 2 running Raspbian The answers to above questions really linuux on user’s product applications and target market, which can be different on individual cases.
CONFIG_USB_NET_AX8817X: ASIX AX88xxx Based USB 2.0 Ethernet Adapters
Intel Corporation physical id: Check with lsusb -v, field bcdUSB. This only supports USB1. AXB Bus Device Doesn’t seem to require any extra power a88772b. New USB device strings: Needs its own power source.
RPi USB Ethernet adapters –
Unlike later, USB 1. Adapter needs last raspbian kernel. Works with a Model “A” Pi if plugged into an external maybe unpowered hub. I’ve been qx88772b up to both ethernet ax8872b wifi for 2 years across 5 ubuntu releases and never had a problem Please contact the technical support of your AXB device manufacturer to obtain a proper driver.
Tested with and without powered USB hub. This page was last edited on 6 Julyat Post as a guest Name.
But the problem is that you have connected wired and wireless interfaces at the same time. If you still have problems, please refer to Section 4 of AXB macOS driver installation guide in the driver package to isolate your issue.
While it is advertised as USB 2. Sign up using Facebook. Raspberry Pi reboots when you plug it into the USB port, but after that works fine.
With that driver the device is detected, but it does not seem to be possible to actually put any traffic through it. It correctly connects and even some pings pass for oinux few seconds, but then everything stops. Works out of box very stable with asix kernel driver on latest raspbian 3. It looks ax88772b many of these are sold through eBay. Here are unamelsusbifconfig and lshw outputs:. This is proper work.
networking – USB to Ethernet (ASIX AXB) stopped working after updates – Ask Ubuntu
Bus Device Reboot and you should have a fully working Ethernet adapter. Do I have ilnux assign a unique serial number to every AXB based device? Local Loopback inet addr: The driver for the chipset Asix AX included with the Raspbian kernel v 3.