According to the type of the PBX connected, select the mode to connect an outside call. U Setting if the image scanning quality in fax mode is initialized cont. Figure Press the interrupt key. Answered on Jun 06, Detects the presence of paper on the job separator tray. Also check for continuity within the operate.
|Date Added:||25 May 2009|
|File Size:||39.34 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Select the item by lighting a copy exposure indicator using the copy exposure adjustment keys. How to Install a Toner Cartridge in the Copystar CS Multifunctional System In the first step of the replacement procedure, you must open the front cover of your Copystar CS Multifunctional System, and then unlock the exhausted toner cartridge by sliding the release lever to the right until it stops.
Indirect electrostatic system Copystsr Toner adhered to the transfer roller is removed by the transfer cleaner. Remove the tape holding the front cover and the power cord, and remove the tape binding the power cord.
Wind the new tungsten wire six turns around one end of the charger spring and trim the end. Supported media types are bond paper, transparencies, labels and envelopes.
Purpose Used if margins are not correct when the optional DF is used.
Copystar CS-2030 Copier (022AX609)
Discussion threads can be closed at any time at our discretion. Image scanning unit positioned incorrectly. Purpose To check the operation of each solenoid.
Figure The new setting is stored. Misc by Wayne Cunningham Apr 7, Page Maintenance Description item No. If the reverse of the copy is facing the wrong way then you know that the paper needs to go into teh paper tray with the arrow facing you.
Copystar CS Copier (AX) Overview – CNET
Purpose To be executed if there is a regular error between the centers of the original and the copy image when the optional DF is used. Open the front cover and remove the image Stop ring formation unit copystaf page Also used when reentering data after replacing the backup RAM or initializing the set data.
Enter a destination code using the numeric keys refer to the destination code list on page for the destination code. Inert gas lamp Dimensions U Checking solenoid operation Description Turns each solenoid on. Adjustment items copy exposure indicator Exp.
DF left margin Select the item to be adjusted using Exp. Remove the screw securing the original feed guide and then the guide.
Safety warnings and precautions Various symbols are used to protect our service personnel and customers from physical danger and to prevent damage to their property. U Setting an alarm for when reception is completed cont.
Copystar CS-2030 Service Manual
Purpose To prevent clpystar in halftone due to differences in drum sensitivity. U Destination code list cont. Try feeding the paper from a different paper cassette also. Purpose To check the maintenance count. In the next step of the replacement procedure, you must align the arrows on the top of the new toner cartridge with the cutouts in the eject tray, and then insert the new component into place.
Copystar CS OEM Toner Cartridge – 11, Pages – QuikShip Toner
Staple cartridge sensor STCS U Clearing data Description Initializes data related to the fax transmission such as transmission history and IDs. Misadjusted DF center line.
Tap the toner cartridge on the top five or six times and shake it horizontally eight to ten times to agitate the toner. Page 3 Adjusting the lateral squareness of the DF Perform the following adjustment if the leading edge or trailing edge of the copy image is laterally skewed lateral squareness not obtained.