Playing around with the delay and repeat settings didn’t make any difference. Curiously, the power supply in my machine failed a Dell OptiPlex – Small Form Factor and I connected the machine up to a bigger power supply from another machine. The previous firmware version is more stable. You should have the card operating correctly now. This page was last modified on 6 February , at However there is a patch missing which enables support:
|Date Added:||6 December 2012|
|File Size:||68.93 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Curiously, the power supply in my machine failed a Dell OptiPlex – Small Form Factor and I connected the machine up to a bigger power supply from another machine. Disabling the power management on the USB bus fixed this problem. I Gregoryo have had no success with the remote, but there is hope from dmesg:. To do a true cold boot to replicate the act of pulling out a USB device make sure the mains power cord is removed – some PSUs have a rocker switch that will do the same job – and wait about seconds for the 5V bus to shut down completely before reapplying power.
Power cycling by using the power button isn’t enough in some cases to bring the malfunctioning DS to a true cold boot state. Two channel tuning on this card at least now works out of the box on kernel 2.
V4L/DVB: af9015: support for Leadtek WinFast DTV2000DS [Linux 2.6.34]
This is based on the following commit: If not, double check the process, check for errors that might have been missed, and if it all fails, post to a forum. This page was last modified on 6 Februaryat There is another issue that better get fixed and it is to do with I2C byte write numbers. This was the only way I could get a pair of recently unresponsive DS cards to start working again – the ATX power button cycling wasn’t enough.
Second tuner only works on rare occassions. Although there are some people that have come up with shell scrips and patches to get something similar, it is better that everyone knows how things are done, and also hopefully this will be incorporated into the new releases of V4L.
Playing around with the delay ftv2000ds repeat settings didn’t make any difference. The remote control emulates a keyboard but it very often generates more keypresses than what was put in.
Digital Tuner Cards
The rest of the process is still the same. Here I am referring to a specific tag of the repository, i. To use the previous version replace the “wget” line in step 5 with:. This is based on debian flavours. It is currently not supported out of the box, though it can be made to dgv2000ds in some circumstances.
Digital Tuner Cards – MythTV Official Wiki
You should have the card operating correctly now. If you have a quick look inside the file just out of interestyou will notice that how this bug was messing up all the tuner frequency calculations. I get no indication of any signal coming from the remote. The second tuner has been fine for 4 weeks now without a single reboot.
Leadtek WinFast DTVDS PLUS – LinuxTVWiki
All is described here:. This seems to be caused by power management on the USB bus. Similar problem is described here for a Haupage card: Retrieved from ” https: Then shut down your computer important if you’ve been trying to load this card already, as the correct firmware will be loaded and turn it on again If you have recent kernels such as 2.
I expect this means the card is supported out of the box on Until then we all have to sweat it a bit!! linus
Am I missing a kernel driver module? This fix is from discussions here http: This fix is from http: Please leave comments in the discussion session or put comments in http: